Orbital Flying Saw for flying ERW tubes cutting
Specification and Cutting Parameter
|
Dia |
Kerf |
Body |
Bore |
Teeth |
Linear Speed |
Feed per tooth |
|
250 |
2.8 |
2.4 |
50 |
40/50 |
300-400m/min |
0.04-0.15mm |
|
300 |
3.0/4.0 |
2.4/3.2 |
50/80 |
54/60 |
300-400m/min |
0.04-0.15mm |
|
355 |
3.8/4.0 |
3.0/3.2 |
45/80 |
64/72 |
300-400m/min |
0.04-0.15mm |
|
380 |
3.8/4.0 |
3.0/3.2 |
115 |
66/72 |
300-400m/min |
0.04-0.15mm |
|
405 |
4.0/4.4 |
3.2/4.0 |
115 |
66/80 |
300-400m/min |
0.04-0.15mm |
TCT(Tungsten Carbide Tip)+ Double PVD coating
Orbital Flying Saw suitable for orbital cutting machines with 2-3 or 4 blades.
Special teeth geometries design to obtain the highest cutting performance.
Suggested linear speed : 300-400 m/min
Applications : Cutting flying ERW tubes, using twin saw head to cut oil pipes and construction square pipes
Advantages: Smooth end surface, no burrs, long service life
Orbital Flying Saw suitable for orbital cutting machines with 2-3 or 4 blades.
Special teeth geometries design to obtain the highest cutting performance.
Suggested linear speed : 300-400 m/min
Applications : Cutting flying ERW tubes, using twin saw head to cut oil pipes and construction square pipes
Advantages: Smooth end surface, no burrs, long service life
