HSS for flying tubes cutting
Specification and Cutting Parameter
|
Dia |
Kerf |
Bore |
Teeth |
PCD |
Linear Speed |
Feed per tooth |
|
250 |
1.8/2.0 |
32 |
100/120/160/200 |
4*11*63 |
50-120m/min |
0.05-0.10mm |
|
275 |
1.8/2.0 |
32 |
100/120/180/200/220/250 |
4*11*63 |
60-120m/min |
0.05-0.10mm |
|
315 |
2.0/2.5 |
32/40 |
100/120/180/200/220/250 |
4*11*63 |
100-180m/min |
0.05-0.12mm |
|
350 |
2.5/3.0 |
40/50 |
110/120/140/160/1800/220 |
4*15*80 |
110-180m/min |
0.05-0.16mm |
|
400 |
2.5/3.0 |
40/50 |
130/140/160/180/200/220 |
4*15*80 |
110-180m/min |
0.05-0.18mm |
|
425 |
2.5/3.0 |
40/50 |
130/140/160/180/200/220 |
4*15*80 |
110-180m/min |
0.05-0.18mm |
|
450 |
3.0/3.5 |
40/50 |
140/160/180/200/220/240 |
4*16*80 |
110-180m/min |
0.05-0.18mm |
|
500 |
3.0/3.5 |
40/50 |
140/160/180/200/220/240 |
4*16*80 |
110-180m/min |
0.05-0.18mm |
|
560 |
3.0/3.5 |
50/80 |
140/160/180/200/220/240 |
4*16*80 |
110-180m/min |
0.05-0.18mm |
|
600 |
4.0/5.0 |
50/80 |
160/180/200/220/240/300 |
4*16*80 |
110-180m/min |
0.05-0.18mm |
HSS with PVD coating
Surface hardness (Hv): 3700
Oxidation temperature (℃): 720
Friction coefficient: 0.26
The linear speed can up to 80-160m/min
Applications : Cutting structural steel and carbon steel with tensile strength below 800N/mm²
Surface hardness (Hv): 3700
Oxidation temperature (℃): 720
Friction coefficient: 0.26
The linear speed can up to 80-160m/min
Applications : Cutting structural steel and carbon steel with tensile strength below 800N/mm²
